The best way to do this is with a pipe cleaner. Best way i've found is to plug the joint hole with a q tip and fill the bite end with peroxide.
Soak a pipe cleaner with isopropyl alcohol and scrub the inside of the downstem.
How to clean a pipe stem. Run a pipe cleaner (or multiple, if the stem is wide) through the pipe’s stem and repeat with clean pipe cleaners until they come out clean. Push one final dry pipe cleaner through to remove any moisture and set the stem aside. If you use your water or glass pipe on a regular basis, it's recommended that you change out the water after every use.
From here, dip your pipe cleaners, one at a time, in the isopropyl alcohol and run them through the stem and shank until they come out clean. Use the qtips (cotton swabs), pipe cleaners and alcohol to clean out the stem. I use ever clear on a pipe cleaner for the stem and a cotton swab with ever clear for the humidome after each smoke.
I always use a fresh dry ring. And since you're working with a pair of relatively strong cleaners here, make sure you give your stem a good rinse with clean water when you’re done. Use the pipe tool or a pipe knife to clean the inside of the bowl.
This works the vast majority of the time; Run a pipe cleaner back and forth through the opening where the stem connects and down into the bowl. Standing the stem up in the sink, pour water into it with a glass or pitcher, rinsing the lemon juice and baking soda away.
Here are simple steps that will help you maintain your wooden pipe regularly. I then coat any stamping or logo symbols with vaseline to protect them from the bleach. Before pulling it out again, push the pipe cleaner back and forth.
Ream the pipe, leaving a 1 mm layer of dottle (the carbon buildup that protects the briar wood). Use a cleaning solution if you want to but it is not necessary. Removing the shank while the pipe is warm will cause a change in the fitting, causing irreparable damage to the pipe.
Since necessity is the mother of all invention, there is no doubt that pipe smokers who enjoy maintaining their own collections. The tip of the pipe cleaner should be the only part visible. Dirtier water pipes require heavier firepower, cut the crud with 99% pure isopropyl alcohol.
After dumping the ash and dottle, blow through the stem to get rid of any excess ash and dottle. Chances are you may not have heard of this method. Allow the pipe and stem to dry completely before using them.
Using bristle pipe cleaners, moistened with alcohol, vigorously swab out the airhole of the pipe, alternating with dry, regular pipe cleaners. I use the pipe cleaners to clean out the slot in the button end of the stem and remove any build up in that area. Let your pipe cool entirely before you clean it.
Vulcanite) pipe stems when they oxidize. If the inside of your pipe bowl developed a heavy buildup of resins, then you will need to scrape them off with the pipe knife. Clean the pipe with a pipe cleaner.
Clean a pipe with powdered brewery salt. Keep cleaning until all of the residue is removed. If the stem is unusually wide, run two or three pipe cleaners through at a time or fold one in half, depending on the size of your pipe.
I insert a pipe cleaner in the stem and bend it into a hook that i can hang on the side of the bowl or jar. Use obsidian pipe stem oil. However, if the stem still proves too difficult to remove, smoke the pipe, allow it to cool, and try to remove the stem again.
You can simply use a soft pipe cleaner for this. Mix bleach and water (50/50) to remove the oxidation. Retrieve the stem and wash it under hot water once more.
Rinse the stem clean with warm water. Then, use a pipe cleaner to clean the pipe. Replace the stem, and push a fresh pipe cleaner into the stem.
Clean the internals of the stem. Use a pint jar or a bowl that allows you to reach in to remove the stem once it is finished. Keeping your water pipe clean is an integral part of prolonging the lifespan of your pipe.
Cleaning your pipe keeps it functioning as best as it can, and also helps it last longer. Cleaning the shank & stem. I've yet to find a pipe cleaner that won't go through the stem.
Finish it off by running a pipe cleaner through the channel, and you'll prevent any unwelcomed surprises of the sulfurous variety. Place your pipe into a ziplock bag. The final step for cleaning a wooden pipe is to clear your stem of any residue.
Simply soak the pipe overnight in hot water with about a tablespoon of pbw. While there are many products out there marketed directly on how to clean a water pipe, the best method continues to be a coarse grain salt combined with isopropyl alcohol. Place the stem alongside the pipe to air dry.
Run the water in from both ends of the stem — at least thirty seconds each. Add a tablespoon of salt and enough isopropyl alcohol to cover the piece. Plus, cleaning your water pipe often will ensure nothing messes with the flavor of your vapor.
Powdered brewery salt, or pbw, is used by brewers to clean brew pots and fermenters, but can also be very effective in removing gunk from glass pipes. If the stem is still inserted in the pipe and is so difficult to remove that you fear your pipe may be damaged, then place the pipe in the freezer for several minutes. For the most rudimentary daily clean after smoking, run a pipe cleaner through the stem from the bit until it hits the draught hole.
Start with a bristle pipe cleaner. I use the cotton swabs to clean out the end of the tenon and the area around the tenon and the face of the stem. Follow this pipe cleaner with a dry one, and repeat the process until the moist pipe cleaner comes out the same color it was when it went in.
Clear out the stem run a generous number of pipe cleaners through the stem of your pipe until they come out looking clean and good as new again. And, of course, a swab with ever clear for the bowl. Push the pipe cleaner through the stem of the pipe.
Find a way to sit the bowl upright. Use a cotton swab and pipe cleaner to remove residue from the bowl and the inside of the stem. A good technique is to fill a soup bowl with uncooked rice, and rest the stem on the rim of the bowl.
Simply take a clean cloth like the ones we've mentioned earlier and wipe off all of your stems. Clean oxidation from pipe stem what is the best way to clean oxidation from a pipe stem every pipe owner knows about the nasty discoloration that occurs to ebonite (a.k.a. Run a pipe cleaner back and forth through the stem to clean it.